Our team at Tony Wallace is experienced and we have been working in West London for a long time now providing quality masonry services. We have been restoring all kinds of buildings in Hammersmith while also providing the best rates.

For people who do not know much about building maintenance, choosing the right services may be difficult. If done poorly, these services can have major repercussions like damage to the internal structures of the building. Therefore, our experts advise the customers to avoid any DIY hacks and only consult specialists.

Pointing is the process that is used to fill the gaps between the bricks. The filling between the bricks is done with mortar, which has a much shorter lifespan than the bricks themselves. The remaining deteriorated mortar is removed. The gaps are filled with a fresh mortar. We use the best quality cement in the mortar mix to make sure that the service lasts longer and the stability of the structure is maintained.

Pebbledash is a mixture of materials including pebbles, lime, sand, gravel and shells. For this reason, it is a harsh material and is only used on the exterior of the walls to provide them protection against harsh environmental conditions. Some residents may simply not like pebble dash and may be interested in removing it completely.

Our laborers have a good experience of removing pebble dash in Hammersmith and use manual tools while being careful not to ruin the brickwork underneath. If accidentally a brick gets eroded, we make sure that it is restored to its original condition or at least to a good state, which does not compromise the stability of the structure.

Further stability can be achieved by carrying out the pointing process.

Most of the customers that are affiliated with us at Tony Wallace are modern people and thinkers. For this reason, they readily accept and acknowledge change. They come to us looking to change their house paint.

Changing the paint does not require existing paint to be old and flaky. If the paint is not too old, we prefer to use water to remove the dust layer and the paint. If the action of water pressure is not much beneficial, then we use strong chemicals like phosphates to help in paint removal.

The water pressure and use of harsh chemicals may cause erosion of internal bricks and our team is fully aware of that. Our workers will restore the bricks to their original state or good as new state, making sure the stability of the wall is maintained.